Hanfeng electric power tools|Lifting Tools

Reels for Continuous Duct Rods

Used to install  pull rope and winch rope into ducts, ready for cable pulling operations. 

Rod: 11.5mm Dia.×100m long.
Frame Dimensions: 450×1150×1000mm
Weight: 15kg
Note: Rod length available on request (up to 150m).

Block Grounds with One Grounding Pressure Roller

The block ground is attached a small aluminum pressure roller which maintains continuous. grounding by means of a grounding copper wire (copper wire included).

Crossarm Mounted, Three-Purpose Stringing Blocks

Universal Stringing Blocks

The block is used for conductor stringing operation. It can be used in suspension utilizing a hook fitting, or used on crossarms.

Crossarm-Mounted Stringing Blocks

Suitable for use on the steel angle crossarm of tangent
poles to string conductors with medium or small diameters.

Double-Hook Turnbuckles (Aluminum Alloy)

The turnbuckles are used to tension guys or steel ropes etc.

"8" Shaped Connectors

8 Shaped Connectors can pass through a bend easily.

Open-End Wrenches.

Used to tighten hex or square head bolts. The wrenches are forged from highest quality steel.

Ratchet Wrenches.

Used to tighten hex head bolts, speedy and　easy to use.

Ground drill

Application :Used for temporary fastening the steel wire rope in line workings

Application :Used for single conductor accessories installation and repairing .
Rated loading (KN):1
Weight (Kg):7
Remarks :Hand-pulling foldable type , the double wires used for conductor vertically ranked line .
Iron two wires flying carrier

Aluminum alloy two wires flying carrier

Application: Can be used in straight, right and left three directions, for corner pole wire paying-off in three directions. Product code: Aluminum wheel: 33151 Nylon Wheel: 33161 Model: Aluminum wheel: SHC-2 Nylon Wheel: SHCN-2 Rated loading (KN):20 Limitation of loading (KN):40 Applicable conductor: LGJ25-240 Weight (Kg): Aluminum wheel: 3.7 Nylon Wheel: 3.5

Skyward hook-type two purpose wire paying-off pulley

Application: Used for the lifting workings of pole tower setting, line setting up, equipments lifting and installation, as well as other lifting workings. Note :pulley material use cast steel instead of former cast iron , widen the wheel slot , the diameter of wheel has been decreased , the total area of pulley has decreased 1/3 compare with former cast iron pulley .

Suspend rope pulley

Application :Used for optical cable hot-line paying –off on old tower grounding wire .
Two heels pulley

Portable mechanical angle steel cutting machine

Single-line pulley

Insulation pulley

Gear type wire cutter

Aluminum alloy double hooks turn –buckle

Mechanical hole puncher

Supporting point pulley

Aluminum alloy ground wire lifter

Insulation conductor clamp

Application :Used for the standing and arrangement of pole towers with the safe coefficient 2.5 during power lines workings of transmission and distributing . Instruction : The heads of the embracing pole contain reverse –falling fixed type and two –purpose of reverse –falling and fixed type , which should be noted when place the purchase order

electric power tools ,equip,Alu.alloy manual gourd series ,Tensile testing table series ,Twist proof steel-wire rope series ,Embracing pole on tower series , Twist abrader series ,Wire clamp series ,Clamp series ,Lifter series ,Lifter series ,Pulley series ,Hydraulic tool series ,Wire distribution frame series ,String&joint tool series ,Insulation tool series ,Flat ladder series ,Cutting tool series ,Other tool series